Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T06:33:27.213Z Has data issue: false hasContentIssue false

Heterojunction, Vacuum-Glass Field Effect Transistors

Published online by Cambridge University Press:  01 February 2011

Michael W. Geis
Affiliation:
SPANOS@LL.MIT.EDU, MIT Lincoln Laboratory, Submicrometer Technology, 244 Wood St., Lexington, MA, 02420, United States, 781-981-4658, 781-981-4983
Sandra Deneault
Affiliation:
deneault@ll.mit.edu, MIT Lincoln Laboratory, Submicrometer Technology, United States
Keith E. Krohn
Affiliation:
krohn@ll.mit.edu, MIT Lincoln Laboratory, Submicrometer Technology, United States
Michael Marchant
Affiliation:
marchant@ll.mit.edu, MIT Lincoln Laboratory, Submicrometer Technology, United States
David L. Cooke
Affiliation:
David.Cooke@hanscom.af.mil, U.S. Air Force Research Laboratory, United States
Theodore M. Lyszczarz
Affiliation:
tedl@ll.mit.edu, MIT Lincoln Laboratory, Submicrometer Technology, United States
Get access

Abstract

This note reports on a surface field effect transistor, SFET, where the electron channel consists of the interface between vacuum and a Cs-doped glass, and an electrode on the back of the glass substrate is used as the gate. The device has a transconductance of 4×10−10 S cm−1. The transconductance is limited by the glass surface roughness, ∼ 0.4 nm RMS. A reduction of surface roughness to 0.1 nm RMS is expected to increase device transconductance.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable