Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T17:54:21.628Z Has data issue: false hasContentIssue false

High Density Plasma Damage Induced in n-GaN Schottky Diodes Using Cl2/Ar Discharges

Published online by Cambridge University Press:  03 September 2012

A.P. Zhang
Affiliation:
Department of Chemical Engineering University of Florida, Gainesville, FL 32611
G. Dang
Affiliation:
Department of Chemical Engineering University of Florida, Gainesville, FL 32611
F. Ren
Affiliation:
Department of Chemical Engineering University of Florida, Gainesville, FL 32611
X.A. Cao
Affiliation:
Department of Materials Science and Engineering University of Florida, Gainesville, FL 32611
H. Cho
Affiliation:
Department of Materials Science and Engineering University of Florida, Gainesville, FL 32611
E.S. Lambers
Affiliation:
Department of Materials Science and Engineering University of Florida, Gainesville, FL 32611
S.J. Pearton
Affiliation:
Department of Materials Science and Engineering University of Florida, Gainesville, FL 32611
R.J. Shul
Affiliation:
Sandia National Laboratories, Albuquerque NM 87185
L. Zhang
Affiliation:
Sandia National Laboratories, Albuquerque NM 87185
A.G. Baca
Affiliation:
Sandia National Laboratories, Albuquerque NM 87185
R. Hickman
Affiliation:
SVT Associates, Eden Prairie, MN 55344
J.M. Van Hove
Affiliation:
SVT Associates, Eden Prairie, MN 55344
Get access

Abstract

The effects of dc chuck self-bias and high density source power (which predominantly control ion energy and ion flux, respectively) on the electrical properties of n-GaN Schottky diodes exposed to Inductively Coupled Plasma of Cl2/Ar were examined. Both parameters were found to influence the diode performance, by reducing the reverse breakdown voltage and Schottky barrier height. All plasma conditions were found to produce a nitrogen-deficient surface, with a typical depth of the non-stoichiometry being ∼500 Å. Post-etch annealing was found to partially restore the diode characteristics.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable