Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T01:55:35.556Z Has data issue: false hasContentIssue false

High efficiency front-illuminated nanotube-based dye-sensitized solar cells

Published online by Cambridge University Press:  01 July 2011

Kangle Li
Affiliation:
Department of Materials Science and Engineering, National University of Singapore, 5 Engineering Drive 2, Singapore 117576
Stefan Adams
Affiliation:
Department of Materials Science and Engineering, National University of Singapore, 5 Engineering Drive 2, Singapore 117576
Get access

Abstract

A highly reproducible two-step anodization method is reported to fabricate anatase TiO2 nanotube layers. The nanotube membrane fabricated by this method is highly uniform and crack-free. Large area nanotube membranes can be transferred completely onto transparent FTO electrodes without the need for damaging ultrasonic agitation or acid treatment for application in front-illuminated nanotube-based dye-sensitized solar cells. A 16 μm thin front-illuminated nanotube-based dye-sensitized solar cell produced using this method reaches an efficiency of 6.3% under 1 sun illumination AM1.5.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable