Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T23:45:37.383Z Has data issue: false hasContentIssue false

High frequency contact mechanics based on quartz crystal resonators: application to polymer surfaces

Published online by Cambridge University Press:  11 February 2011

Steffen Berg
Affiliation:
Max Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz, Germany
Diethelm Johannsmann
Affiliation:
Max Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz, Germany
Get access

Abstract

High frequency contact mechanics experiments were carried with a quartz crystal resonator, the surface of which was coated with a polystyrene film. The experiment is based on the ring-down of the resonator after the electrical excitation has been stopped. When a tip touches the quartz surface, the shear motion of the quartz is perturbed, which can be used to study force-displacement and force-speed relations in the contact zone. A nonlinear spring constant κl(x) and a nonlinear friction coefficient ξl(ẋ) are explicitly derived. When a ceramic sphere touches a polymer film the friction force depends more than linearly on lateral speed. This contrasts to metal-metal contacts or contacts between ceramic surfaces, where the friction force depends either linearly of sub-linearly on speed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable