Hostname: page-component-7b7567c8c-9cwtv Total loading time: 0 Render date: 2026-11-19T10:32:00.160Z Has data issue: false hasContentIssue false

High Transmission and Low Resistivity Cadmium Tin Oxide Thin Films Deposited by Sol-Gel

Published online by Cambridge University Press:  18 September 2014

Carolina. J. Diliegros Godines
Affiliation:
Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Unidad Querétaro, A. P. 1-798, Querétaro, Qro. 76001, México.
Rebeca Castanedo Pérez
Affiliation:
Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Unidad Querétaro, A. P. 1-798, Querétaro, Qro. 76001, México.
Gerardo Torres Delgado
Affiliation:
Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Unidad Querétaro, A. P. 1-798, Querétaro, Qro. 76001, México.
Orlando Zelaya Ángel
Affiliation:
Depto. de Física, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, A.P. 14-740, México 07360, México D.F., México.
Get access

Abstract

Transparent conducting cadmium tin oxide (CTO) thin films were obtained from a mixture of CdO and SnO2 precursor solutions by the dip-coating sol-gel technique. The thin films studied in this work were made with 7 coats (∼200 nm) on corning glass and quartz substrates. Each coating was deposited at a withdrawal speed of 2 cm/min, dried at 100°C for 1 hour and then sintered at 550°C for 1 hour in air. In order to decrease the resistivity values of the films, these were annealed in a vacuum atmosphere and another set of films were annealed in an Ar/CdS atmosphere. The annealing temperatures (Ta) were 450°C, 500°C and 550°C, as well as 600°C and 650°C, when corning glass and quartz substrates were used, respectively. X-Ray diffraction (XRD) patterns of the films annealed in a vacuum showed that there is only the presence of CTO crystals for 450°C≤ Ta ≤ 600°C and CTO+SnO2 crystals for Ta=650°C. The films annealed in Ar/CdS atmosphere were only constituted of CTO crystals independent of the Ta. The minimum resistivity value obtained was ∼4 x 10-4 Ωcm (Rsheet= 20 Ω/□) for the films deposited on quartz and annealed at Ta=600°C under an Ar/CdS atmosphere. The films deposited on quartz showed the higher optical transmission (∼90%) with respect to the films deposited on corning glass substrates (∼85%) in the Uv-vis region. For their optical and electrical characteristics, these films are good candidates as transparent electrodes in solar cells.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable