Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T16:08:04.632Z Has data issue: false hasContentIssue false

High-Temperature Potentiometric NO2 and CO Sensors Based on Stabilized Zirconia with Oxide Sensing Electrodes

Published online by Cambridge University Press:  11 February 2011

E. Di Bartolomeo
Affiliation:
Department of Chemical Science and Technology, University of Rome Tor Vergata, Via della Ricerca Scientifica, 00133 Rome, Italy
M. L. Grilli
Affiliation:
Department of Chemical Science and Technology, University of Rome Tor Vergata, Via della Ricerca Scientifica, 00133 Rome, Italy
N. Kaabbuathong
Affiliation:
Department of Chemical Science and Technology, University of Rome Tor Vergata, Via della Ricerca Scientifica, 00133 Rome, Italy
E. Traversa
Affiliation:
Department of Chemical Science and Technology, University of Rome Tor Vergata, Via della Ricerca Scientifica, 00133 Rome, Italy
Get access

Abstract

This paper reports the efforts made in our laboratory to develop electrochemical sensors that might detect NO2 and CO at high temperatures for On Board Diagnostic (OBD) application. The non-Nernstian behaviour of zirconia-based electrochemical NO2 sensors with various oxides as sensing electrodes was studied in the temperature range 450–700°C. Both pellets and tape-casted layers (150 μm of thickness) of yttria-stabilized zirconia (YSZ) were used for fabrication of the sensors. Pt electrodes were painted on both sides of the pellets or as two parallel fingers on one face of the layers. One of the Pt electrodes was covered with a thick-film oxide electrode. Various oxides were tested as sensing electrodes, either p- or n-type semiconductors, including WO3 and LaFeO3. The role of ionic conductivity of the oxide electrodes was investigated using Sr-doped perovskite-type oxides, such as LaxSr1-xFeO3, a mixed ionic-electronic conductor. The sensors were tested as potentiometric and amperometric devices. The performance of these devices was promising: fast and stable responses to different NO2 concentrations (20–1000 ppm in synthetic air) were observed at high temperatures. The role of the metallic electrodes is also studied. The sensing mechanism of the sensors is discussed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable