Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T19:05:05.850Z Has data issue: false hasContentIssue false

High-Temperature Properties of Langasite

Published online by Cambridge University Press:  15 February 2011

H. Fritze
Affiliation:
Technische Universität Clausthal, Institut für Metallurgie, Robert-Koch-Straße 42, D-38678 Clausthal-Zellerfeld, Germany, holger.fritze@tu-clausthal.de
H. L. Tuller
Affiliation:
Massachusetts Institute of Technology, Department of Materials Science & Engineering, 77 Massachusetts Avenue, Cambridge, MA 02139, USA
G. Borchardt
Affiliation:
Technische Universität Clausthal, Institut für Metallurgie, Robert-Koch-Straße 42, D-38678 Clausthal-Zellerfeld, Germany, holger.fritze@tu-clausthal.de
T. Fukuda
Affiliation:
Tohoku University, Institute for Materials Research, Sendai 980-8577, Japan
Get access

Abstract

Materials such as langasite (La3Ga5SiO14) and related compounds are promising candidates for piezoelectric applications at high temperatures. In particular, langasite does not exhibit phase transformations up to the melting point of 1470 °C. Langasite was investigated with respect to potential applications in high temperature resonator devices. In contrast to current resonator materials, we have observed bulk oscillations at temperatures of up to 750 °C in langasite devices. At 700 °C the mass load response for 0.78 mm thick resonators is approximately 0.10 µg/Hz.

At elevated temperatures, the bulk resistivity of the resonator devices cannot be neglected due to attenuation of the resonance signal. Therefore, the temperature dependence of the electrical properties of langasite resonator devices, including bulk resistivity, capacity and resonance frequency were measured and are presented. The electrical conductivity is characterized by an activation energy of 105 kJ/mol. In order to confirm langasites stability with respect to oxidation-reduction reactions, we examined the oxygen diffusivity by measuring 18O tracer profiles by SIMS. The diffusivity along the Y-axis is given by D = 5-10−5 exp(-140 kJ/mol / RT) cm2/s in the temperature range from 500 to 800 °C. Langasite shows low oxygen diffusion coefficients with respect to other materials which might be investigated using a langasite microbalance. This would, for example, enable oxygen diffusion kinetics to be examined in YBa2Cu3O6 at 600 °C by means of 18O/16O exchange.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable