Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T23:30:50.842Z Has data issue: false hasContentIssue false

Hot Embossing of Microfluidic Channel Structures in Cyclic Olefin Copolymers

Published online by Cambridge University Press:  01 February 2011

Patrick William Leech
Affiliation:
Patrick.Leech@csiro.au, CSIRO, Gate 5 Normanby Rd, Clayton, 3169, Clayton, Victoria, 3169, Australia
Xiaoqing Zhang
Affiliation:
Xiaoqing.Yang@csiro.au, CSIRO, CMSE, Clayton, Victoria, Victoria, Australia
Yonggang Zhu
Affiliation:
Yonggang_Zhu@fakemail.com, CSIRO, Materials Science and Engineering, Highett, Victoria, Australia
Get access

Abstract

The dynamic mechanical behaviour of a series of cyclic olefin copolymers (COCs) with varying norbornene content has been examined in the vicinity of the glass transition temperature, Tg. The temperature of the transition has been shown to increase linearly with increase in norbornene content. Measurements of both the elastic storage modulus, E′, and loss modulus, E″, have decreased exponentially with rise in temperature above Tg . A levelling-off in E″ occurred at >20 °C above Tg for all copolymers. The results of Dynamic Mechanical Thermal Analysis (DMTA) have been used in the identification of optimum conditions for hot embossing. At >20 °C above Tg in a region of viscous liquid flow, the hot embossing of COC has resulted in a full replication of channel depth without cracking or distortion.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable