Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T20:31:40.265Z Has data issue: false hasContentIssue false

Hrtem Studies of Dislocations and Interfaces in TiAl

Published online by Cambridge University Press:  10 February 2011

M. J. Mills
Affiliation:
Department of Materials Science and Engineering, The Ohio State University, Columbus, OH 43210
J. M.K. Wiezorek
Affiliation:
Department of Materials Science and Engineering, The Ohio State University, Columbus, OH 43210
H. L. Fraser
Affiliation:
Department of Materials Science and Engineering, The Ohio State University, Columbus, OH 43210
Get access

Abstract

In this paper, we summarize the results of high resolution transmission electron microscopy investigations of the structure of dislocations and interphase boundaries in Ti-Al alloys. Dislocations of the type 1/2<110] and 1/2<112] have been examined in 60° and 90° orientations, respectively, in single-phase Ti-52 at%Al. The former dislocation exhibits an extremely compact core configuration, suggesting a high complex stacking fault energy, while the latter is dissociated the scale of several nanometers in a coupled intrinsic/extrinsic stacking fault configuration. Two types of α2/γ interface structures have been observed in nearly fully-lamellar Ti-48 at%Al. The first is consistent with the common observation of structural ledges due to 1/6<112> dislocations in the interface plane. The second interface type consists of a quasi-periodic array of 1/2<110] dislocations which do not lie in the interface, and appear to be contained wholy within the γ phase. The possible implications of these observations with respect to the mechanical behavior of both single-phase γ and two-phase lamellar microstructures are discussed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable