Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T20:27:42.700Z Has data issue: false hasContentIssue false

Hydrogen from bioethanol: Catalytic honeycombs loaded with Co-Fe/ZnOfor small-scale energy applications

Published online by Cambridge University Press:  07 July 2011

Cristian Ledesma
Affiliation:
Institut de Tècniques Energètiques, Universitat Politècnica de Catalunya. Diagonal 647, ed. ETSEIB, 08028 Barcelona, Spain.Centre de Recerca en Nanoenginyeria, Universitat Politècnica de Catalunya. Pasqual i Vila 15, 08028 Barcelona, Spain.
Maria Roig
Affiliation:
Institut de Tècniques Energètiques, Universitat Politècnica de Catalunya. Diagonal 647, ed. ETSEIB, 08028 Barcelona, Spain.
Jordi Llorca*
Affiliation:
Institut de Tècniques Energètiques, Universitat Politècnica de Catalunya. Diagonal 647, ed. ETSEIB, 08028 Barcelona, Spain.Centre de Recerca en Nanoenginyeria, Universitat Politècnica de Catalunya. Pasqual i Vila 15, 08028 Barcelona, Spain.
Get access

Abstract

Catalytic monoliths loaded with ZnO-supported Co-Fe catalysts were prepared in one step by the in situ urea method and tested in the ethanol steam reforming reaction to produce hydrogen. The most active and selective formulation was attained with a Fe/Co molar ratio between 0.05 and 0.1, which showed negligible amounts of methane among the reaction products, thus offering an active and selective material for the low-temperature steam reforming of ethanol for small-scale energy applications.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable