Hostname: page-component-7b7567c8c-8tzhz Total loading time: 0 Render date: 2026-11-19T08:22:28.012Z Has data issue: false hasContentIssue false

Hydrogen Passivation of Si and Be Dopants in InAlAs

Published online by Cambridge University Press:  26 February 2011

G. Roos
Affiliation:
Department of Electrical Engineering, Solid State Electronics Laboratory, Stanford University, Stanford, CA 94305Xerox Palo Alto Research Center, Palo Alto, CA 94304
N. M. Johnson
Affiliation:
Xerox Palo Alto Research Center, Palo Alto, CA 94304
Y. C. Pao
Affiliation:
Department of Electrical Engineering, Solid State Electronics Laboratory, Stanford University, Stanford, CA 94305
J. S. Harris Jr
Affiliation:
Department of Electrical Engineering, Solid State Electronics Laboratory, Stanford University, Stanford, CA 94305
C.y Herring
Affiliation:
Department of Applied Physics, Stanford University, Stanford, CA 94305
Get access

Abstract

Hydrogen passivation and thermal reactivation of Si donors and Be acceptors were investigated in In0.52Al0.48As grown by molecular beam epitaxy. The semiconducting alloy was passivated by exposure to monatomic hydrogen or deuterium from a remote microwave plasma. The passivation was achieved by exposing the samples to monatomic hydrogen at temperatures between 200 and 250 °C for 1h. The electrical activity of the dopants was monitored by spreading resistance and C-V measurements. The samples were homogeneously doped to concentrations of 1.5×1016 or 6×1017 Si / cm3 and 6×1017 Be / cm3. Both dopants were passivated by more than two orders of magnitude through the epitaxial layers. An additional annealing step (440°C, 5 min) resulted in a complete reactivation of the passivated dopants. In addition to the electrical measurements, secondary ion mass spectroscopy showed that for both the Be- and the Si-doped layers the hydrogen profiles were essentially identical to the dopant profiles throughout the epilayers. This behaviour suggests that hydrogen migration is a dopant-trapping-limited process in n-and p-type In0.52Al0.48As.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable