Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T09:19:43.115Z Has data issue: false hasContentIssue false

Hydrothermal Preparation and Sintering of Fine Ceramic Powders

Published online by Cambridge University Press:  21 February 2011

Shigeyuki Sōmiya*
Affiliation:
Laboratory for Hydrothermal Syntheses, Research Laboratory of Engineering Materials, Tokyo Institute of Technology, 4259 Nagatsuta, Midori, Yokohama 227, JAPAN
Get access

Abstract

Hydrothermal preparation is one of the methods to make fine ceramic powders. There are: (1) hydrothermal oxidation, (2) hydrothermal precipitation, (3) hydrothermal synthesis, (4) hydrothermal decomposition, (5) hydrothermal crystallization, etc. Starting materials for hydrothermal oxidation is mainly metal. Reaction between metal and high temperature-high pressure solution occurs to form oxide. Therefore, starting materials for very fine powders are: (1) metal powders or chips, (2) gel, solutions, etc., (3) oxides and solutions, (4) solids, and (5) hydrous material. This paper describes hydrothermal crystallization and oxidation. Fine powders of ZrO2, Al2O3, HfO2, and Al2O3-ZrO2 are described.

Sintered bodies are also able to get under hydrothermal conditions with reactions. Hydrothermal reaction sintered bodies of iron oxides, Cr2O3, ZrO2 and HfO2 were obtained under 100 MPa above 1000°C with 1–5 μm grains.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable