Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-19T03:55:02.290Z Has data issue: false hasContentIssue false

Identification of Defects In Ferritic/Martensitic Steels Induced by Low Dose Irradiation

Published online by Cambridge University Press:  21 March 2011

R. Schäublin
Affiliation:
CRPP, Fusion technology, Materials Group, Ecole Polytechnique Fé3dé3rale de Lausanne, 5232 Villigen PSI, Switzerland
M. Victoria
Affiliation:
CRPP, Fusion technology, Materials Group, Ecole Polytechnique Fé3dé3rale de Lausanne, 5232 Villigen PSI, Switzerland
Get access

Abstract

The ferritic/martensitic steels which are candidates for the first wall of the future fusion reactor are investigated in TEM. While the irradiation doses expected in this reactor are in the range of 100 dpa per year, there is still a lack of knowledge on the nature of the irradiation induced defects for the low doses at which hardening is already occuring. This hardening depends strongly on the type of interaction between the moving dislocations and the defects. The early defects, which start to appear as black dots in TEM, are expected to be either three dimensional clusters of interstitials or vacancies, or dislocation loops. The nature and size of these defects is carefully studied in the F82H steel for doses ranging from about 0.5 dpa to 9 dpa and irradiation temperatures ranging from 40°C to 330°C. For that purpose, various weak beam techniques are explored at the limit of resolution of a TEM used in diffraction mode. Results are presented here for the cases of a 1.7 dpa and a 8.8 dpa irradiation.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable