Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T10:22:49.027Z Has data issue: false hasContentIssue false

Improved Adhesion of P-doped SiO2-Interface Layers on InP by Low-Temperature Damage-Free Plasma-CVD

Published online by Cambridge University Press:  21 February 2011

R. Riemenschneider
Affiliation:
Institute of High Frequency Electronics, Technical University of Darmstadt, Merckstr. 25, 64283 Darmstadt, Germany
H.L. Hartnagel
Affiliation:
Institute of High Frequency Electronics, Technical University of Darmstadt, Merckstr. 25, 64283 Darmstadt, Germany
H. Kräutle
Affiliation:
Research Center Telekom FTZ Am Kavalleriesand 3, 64295 Darmstadt, Germany
Get access

Abstract

The deposition of thin films on III-V compound semiconductors is encountered with various interfacial problems. We present a new approach using a modified plasma technique in a phosphorous ambient at substrate temperatures ranging from 250 to 350 °C which covers two import aspects: Firstly, a good insulator quality due to the plasma process. Secondly, an appropriate surface pre-treatment and defect passivation by a phosphine-like cleaning process using a solid phosphorous source. The analysis of the film adhesion yields improved adhesive properties due to the high activation energy of a plasma process for surface reactions, and by preventing a phosphorus-related defects. The phosphorous concentration in the SiO2 films has to be adapted in order to prevent electrical degradation of the SiO2-InP interface. The influence of phosphorous deficiency and excess phosphorous will be discussed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable