Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T00:52:27.118Z Has data issue: false hasContentIssue false

Improving the Organic Semiconductor- Metal Contact Interface in Printed High Performance Organic TFTs

Published online by Cambridge University Press:  07 February 2012

Kanan Puntambekar
Affiliation:
Sharp Laboratories of America, 5700 NW Pacific Rim Blvd, Camas, WA-98607, USA.
Lisa Stecker
Affiliation:
Sharp Laboratories of America, 5700 NW Pacific Rim Blvd, Camas, WA-98607, USA.
Kurt Ulmer
Affiliation:
Sharp Laboratories of America, 5700 NW Pacific Rim Blvd, Camas, WA-98607, USA.
Themistokles Afentakis
Affiliation:
Sharp Laboratories of America, 5700 NW Pacific Rim Blvd, Camas, WA-98607, USA.
Steven Droes
Affiliation:
Sharp Laboratories of America, 5700 NW Pacific Rim Blvd, Camas, WA-98607, USA.
Get access

Abstract

Optimization of the interface between the organic semiconductor (OSC) & the source-drain (S/D) electrode is critical in order to improve organic thin film transistor (OTFT) device performance. This process typically involves coating the metal S/D electrodes with an optimal self-assembled thiol layer; a process that requires pristine metal surfaces for successful treatment. Obtaining contamination free surfaces can be challenging in the case of printed metal electrodes. Here we demonstrate an effective strategy to address this issue by introducing a brief low power forming gas plasma treatment prior to the surface coating step. We show a two orders of magnitude decrease in the contact resistance as a result of this treatment.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable