Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T15:16:41.385Z Has data issue: false hasContentIssue false

In Situ Control of Native Oxide Growth for Semiconductor Processes

Published online by Cambridge University Press:  25 February 2011

Mizuho Morita
Affiliation:
Department of Electronic Engineering, Faculty of Engineering, Tohoku University, Sendai 980, Japan
Tadahiro Ohmi
Affiliation:
Department of Electronic Engineering, Faculty of Engineering, Tohoku University, Sendai 980, Japan
Get access

Abstract

In situ control methods of native oxide growth on Si surfaces at room temperature and during the temperature ramp-up are proposed for metal/Si contact formation, lowtemperature Si epitaxy, and very-thin thermal oxide film formation, based on analyses of factors dominating the oxide growth. Low-resistance W/Si contacts are formed by N2 gas sealed processing of HF cleaning right before W chemical vapor deposition(CVD). Highquality epitaxial Si films are grown at a low temperature of 550°C using Si2H6 molecular flow pre-showering to suppress the oxide growth caused by water or oxygen in a CVD reactor. Very thin gate oxide films with high insulating performance are realized by the preoxidation step at 300°C to form one-molecular-layer oxide for passivation and by the subsequent temperature ramp-up step in ultraclean Ar gas to prevent oxide growth and an increase of surface microroughness before the thermal oxidation step.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable