Hostname: page-component-7b7567c8c-kwt9d Total loading time: 0 Render date: 2026-11-15T04:53:31.884Z Has data issue: false hasContentIssue false
  • English
  • Français

Industrial Applications of Variable Frequency Microwave Energy in Materials Processing

Published online by Cambridge University Press:  10 February 2011

Z. Fathi,
D. A. Tucker,
W. A. Lewis and
J. B. Wei
Z. Fathi
Affiliation:
Lambda Technologies, Inc., 8600 Jersey Ct, Ste C, Raleigh, NC 27613
D. A. Tucker
Affiliation:
Lambda Technologies, Inc., 8600 Jersey Ct, Ste C, Raleigh, NC 27613
W. A. Lewis
Affiliation:
Lambda Technologies, Inc., 8600 Jersey Ct, Ste C, Raleigh, NC 27613
J. B. Wei
Affiliation:
Lambda Technologies, Inc., 8600 Jersey Ct, Ste C, Raleigh, NC 27613
Get access

Abstract

A review of some market-driven research, process applications and systems development is provided. The variable frequency microwave processing concepts are briefly described. Industrial processing using variable frequency microwave energy in the areas of polymerization, composite processing, bonding and plasma is discussed. Analytical applications inherent in the use of variable frequency and its control are demonstrated in the areas of materials signature analysis for volumetric cure monitoring.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 430: Symposium O – Microwave Processing of Materials V , 1996, 21
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Johnson, A. C., Lauf, R.J., Surret, A. D., in Microwave Processing of Materials IV, edited by Iskander, M.F., Lauf, R.J.and Sutton, W.H. (Materials Research Society Proceedings 347, Pittsburgh, PA, 1994) pp. 453–458.Google Scholar
2. Johnson, A.C., Espinosa, R.J., Lewis, W.A., Thigpen, L.T., Everleigh, C.A., and Garard, R.S. in Microwaves: Theory and Applications in Materials Processing II, edited by Clark, D.E., Tinga, W.R., and Laia, J.R. (American Ceramic Society Transactions 36, Westerville, OH, 1993) pp. 563–570.Google Scholar
3. White, M.J., Dillon, S.F., Iskander, M.F., and Bringhurst, S. “FDTD Simulation of Variable Frequencies in a large multimode cavity used for microwave sintering,” elsewhere in these proceedings.Google Scholar
4. Everleigh, C.A., Johnson, A.C., Espinosa, R.J., and Garard, R.S. in Microwave Processing of Materials IV, edited by Iskander, M.F., Lauf, R.J.and Sutton, W.H. (Materials Research Society Proceedings 347, Pittsburgh, PA, 1994) pp. 79–89.Google Scholar
5. Bible, D.W., Lauf, R.J., and Everleigh, C.A. in Microwave Processing of Materials III, edited by Beatty, R.L., Sutton, W.H., and Iskander, M.F. (Materials Research Society Proceedings 269, Pittsburgh, PA, 1992) pp. 77–81.Google Scholar
6. Lauf, R.J., Bible, D.W., Maddox, S.R., Everleigh, C.A., Espinosa, R.J., and Johnson, A.C. in Microwaves: Theory and Applications in Materials Processing II, edited by Clark, D.E., Tinga, W.R., and Laia, J.R. (American Ceramic Society Transactions 36, Westerville, OH, 1993) pp. 571–579.Google Scholar
7. Lauf, R.J., Bible, D.W., Johnson, A.C., and Everleigh, C.A., Microwave Journal 36(11), 24 (1993).Google Scholar
8. Lauf, R.J., Paulauskas, F.L., and Johnson, A.C. in 28th Microwave Symposium Proceedings (International Microwave Power Institute, Manassas, VA, 1993), pp. 150–155.Google Scholar
9. Lauf, R.J., Surrett, A.D., Paulauskas, F.L., and Johnson, A.C., “Polymer Curing Using Variable Frequency Microwave Processing,” in Microwave Processing of Materials IV, edited by Iskander, M.F., Lauf, R.J.and Sutton, W.H. (Materials Research Society Proceedings 347, Pittsburgh, PA, 1994) pp. 453–458.Google Scholar
10. Fathi, Z., Garard, R.S., Clemons, J.. Saltiel, C., Hutcheon, R.M., DeMeuse, M.T., in Microwaves Theory and Application in Materials Processing III, edited by Clark, D.E., Folz, D.C., Oda, S.J., and Silberglitt, R. (American Ceramic Society Transactions 59, Westerville, OH, 1995) pp. 441–448.Google Scholar
11. Garard, R.S., Fathi, Z., and Wei, J.B., in Microwaves Theory and Application in Materials Processing III, edited by Clark, D.E., Folz, D.C., Oda, S.J., and Silberglitt, R. (American Ceramic Society Transactions 59, Westerville, OH, 1995) pp. 117–124.Google Scholar
12. Rudder, R.A., Hendry, R.C., Hudson, G.C., Markunas, R.J., Johnson, A.C., Thigpen, L.T., Garard, R.S., and Everleigh, C.A. in Microwaves: Theory and Application in Materials Processing II, edited by Clark, D.E., Tinga, W.R., and Laia, J.R. (American Ceramic Society Transactions 36, Westerville, OH, 1993) pp. 377–384.Google Scholar
13. Johnson, A.C., Rudder, R.A., Lewis, W.A., and Hendry, R.C., “Use of Variable Frequency Microwave Energy as a Flexible Plasma Tool,” in Microwave Processing of Materials IV, edited by Iskander, M.F., Lauf, R.J.and Sutton, W.H. (Materials Research Society Proceedings 347, Pittsburgh, PA, 1994) pp. 617–622.Google Scholar
14. Tucker, D.A., McClure, M.T., Fathi, Z., Sitar, Z., Walden, B., Sutton, W.H., Lewis, W.A., and Wei, J.B., “Microwave Plasma Assisted CVD of Diamond On Titanium and Ti-6AI- 4V”, elsewhere in these proceedings.Google Scholar
15. Wei, J.B., Fathi, Z., Tucker, D.A., Hampton, M.L., Garard, R.S., and Lauf, R.J., “Materials Characterization and Diagnosis using Variable Frequency Microwaves”, elsewhere in these proceedings.Google Scholar
16. Patent Pending.Google Scholar
17. Patents Pending.Google Scholar