Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T07:10:12.786Z Has data issue: false hasContentIssue false

Influence of Alloy Microstructure on Oxide Growth in HCM12A in Supercritical Water

Published online by Cambridge University Press:  15 March 2011

Jeremy Bischoff
Affiliation:
Department of Mechanical and Nuclear Engineering, Pennsylvania State University, 227 Reber Building, University Park, PA, 16802, USA.
Arthur T. Motta
Affiliation:
Department of Mechanical and Nuclear Engineering, Pennsylvania State University, 227 Reber Building, University Park, PA, 16802, USA.
Lizhen Tan
Affiliation:
Department of Engineering Physics, University of Wisconsin-Madison, 1500 Engineering Drive, Madison, WI 53706, USA.
Todd R. Allen
Affiliation:
Department of Engineering Physics, University of Wisconsin-Madison, 1500 Engineering Drive, Madison, WI 53706, USA.
Get access

Abstract

HCM12A is a ferritic-martensitic steel alloy envisioned for cladding and structural material in the Generation IV Supercritical Water Reactor (SCWR). This alloy was oxidized in 600°C supercritical water for 2, 4 and 6 weeks, and the oxide layers formed were analyzed using microbeam synchrotron radiation and electron microscopy. The oxide layers show a three-layer structure with an Fe3O4 outer layer, an inner layer containing a mixture of Fe3O4 and FeCr2O4 and a diffusion layer containing FeCr2O4 and Cr2O3 precipitates along ferrite lath boundaries. The base metal microstructure has a strong influence on the advancement of the oxide layers, due to the segregation at the lath boundaries of chromium rich particles, which are oxidized preferentially.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable