Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-19T02:36:19.472Z Has data issue: false hasContentIssue false

Influence of Boron Diffusion on Ultra-Thin Oxides

Published online by Cambridge University Press:  10 February 2011

T. Nigam
Affiliation:
IMEC, Kapeldreef 75, Leuven, Belgium
M. Depas
Affiliation:
IMEC, Kapeldreef 75, Leuven, Belgium
M. Heyns
Affiliation:
IMEC, Kapeldreef 75, Leuven, Belgium
C. J. Sofielc
Affiliation:
AEA Technology, 477 Harwell, Didcot, UK
L. Mapeldoram
Affiliation:
AEA Technology, 477 Harwell, Didcot, UK
Get access

Abstract

In this paper the effect of different annealing conditions on boron diffusion is studied for 3 nm gate dielectrics. The use of amorphous material instead of polycrystalline material and the influence of nitridation (two-step N2O oxidation) was investigated. A better control on the flatband voltage (VFB) shift was observed for amorphous-Si gate as compared to polycrystalline-Si gate. A reduction in VFB was observed for N2O oxides as compared to pure oxides, but VFB was still above the ideal value for some of the thermal treatments. A significant reduction in QBD is observed for p+ gates as compared to n+ gates. The lowest post-implantation anneal gives the highest QBD for all the different combinations.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable