Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T01:07:47.232Z Has data issue: false hasContentIssue false

InGaAs/GaAsSb Heterostructures: Aluminum-Free Intersubband Devices

Published online by Cambridge University Press:  31 January 2011

Michele Nobile
Affiliation:
michele.nobile@tuwien.ac.at, Institute for Solid State Electronics, Vienna University of Technology, Center for Micro-and Nanostructures, Vienna, Austria
Gottfried Strasser
Affiliation:
gs48@buffalo.edu
Hermann Detz
Affiliation:
hermann.detz@tuwien.ac.at, Institute for Solid State Electronics, Vienna University of Technology, Center for Micro-and Nanostructures, Vienna, Austria
Elvis Mujagic
Affiliation:
elvis.mujagic@tuwien.ac.at, Institute for Solid State Electronics, Vienna University of Technology, Center for Micro-and Nanostructures, Vienna, Austria
Aaron Andrews
Affiliation:
aaron.maxwell.andrews@tuwien.ac.at, Institute for Solid State Electronics, Vienna University of Technology, Center for Micro-and Nanostructures, Vienna, Austria
Pavel Klang
Affiliation:
pavel.klang@tuwien.ac.at, Institute for Solid State Electronics, Vienna University of Technology, Center for Micro-and Nanostructures, Vienna, Austria
Werner Schrenk
Affiliation:
werner.schrenk@tuwien.ac.at, Institute for Solid State Electronics, Vienna University of Technology, Center for Micro-and Nanostructures, Vienna, Austria
Get access

Abstract

An experimental study on mid-infrared intersubband absorption in InGaAs/GaAsSb multiple quantum wells grown lattice-matched to InP substrates by molecular beam epitaxy is presented. Intersubband absorption in a broad wavelength region (5.8 - 11.6 μm) is observed in multiple quantum well samples with well widths ranging between 4.5 and 12 nm. A conduction band offset at the InGaAs/GaAsSb heterointerface of 360 meV gives an excellent agreement between the theoretically calculated ISB transition energies and the Fourier-transform infrared spectroscopy measurements over the whole range of well widths under investigation. Two kinds of intersubband devices based on the InGaAs/GaAsSb material system are presented: a quantum well infrared photodetector operating at a wavelength of 5.6μm and an aluminum-free quantum cascade laser. The presented quantum cascade laser emits at a wavelength of 11.3 μm, with a threshold current density of 1.7 kA/cm2 at 78 K.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable