Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T00:48:21.651Z Has data issue: false hasContentIssue false

In‐Situ Mapping and Modeling Verification of Thermomechanical Deformation in Underfilled Flip‐Chip Packaging Using Moiré Interferometry

Published online by Cambridge University Press:  10 February 2011

Get access

Abstract

An experimental technique of environmental moiré interferometry has been developed for in‐situ monitoring and analysis of thermomechanical deformation of microelectronics packages subjected to thermal loading under a controlled atmosphere. Coupled with fractional fringe analysis and digital image processing, the environmental moiré interferometry technique achieves accurate and realistic deformation monitoring with high sensitivity and excellent spatial resolution. It has been applied to investigate the thermomechanical deformations induced by thermal loading in an underfilled flip‐chip‐on‐board packaging. The effects of temperature change in the range of 102 °C to 22 °C are analyzed for underfill and solder bumps. In addition, shear deformation and shear strains across the solder bumps are determined as a function of temperature. The experimental results are compared with the results of a finite element analysis for modeling verification. Good agreement between the modeling results and experimental measurements has been found in the overall displacement fields. Through this study, the role of underfill in the thermomechanical deformation of the underfilled flip‐chip package is determined.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable