Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T06:06:53.971Z Has data issue: false hasContentIssue false

In-Situ Resistance Measurements During Rapid Thermal Annealing for Process Characterization

Published online by Cambridge University Press:  15 February 2011

E.G. Colgan
Affiliation:
IBM Microelectronics Division, Fast Fishkill, NY 12533.
C. Cabral Jr.
Affiliation:
IBM Microelectronics Division, Fast Fishkill, NY 12533.
L.A. Clevenger
Affiliation:
IBM Microelectronics Division, Fast Fishkill, NY 12533.
J.M.E. Harper
Affiliation:
IBM Research Division, Yorktown Heights, NY 10598.
Get access

Abstract

Measurement of resistance in-situ during rapid thermal annealing is a powerful technique for process characterization and optimization. A major advantage of in-situ resistance measurements is the very rapid process learning. With silicides, in-situ resistance measurements can quickly determine an appropriate thermal process in which a low resistance silicide phase is formed without the agglomeration or inversion of silicide/polycrystalline silicon structures. One example is an optimized two step anneal for CoSi2 formation which was developed in less than one clay. Examples of process characterization include determining the phase formation kinetics of TiSi2 (C49 and C54), Co2Si, and CoSi2 using in-situ ramped resistance measurements. The stability of TiSi2 or CoSi2/poly-Si structures has also been characterized by isothermal measurements. Resistance measurements have been made at heating rates from 1 to 100°C/s and temperatures up to 1000°C. The sample temperature was calibrated by melting Ag, Al, or Au/Si eutectics.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable