Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T08:28:16.860Z Has data issue: false hasContentIssue false

Integrated, Dual-Function Remote Plasma-Enhanced Processing Applied to Low Damage SiO2 Etching and Removal of C-F Polymer Residues

Published online by Cambridge University Press:  22 February 2011

T. Yasuda
Affiliation:
Departments of Physics, and Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695–8202
G. Lucovsky
Affiliation:
Departments of Physics, and Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695–8202
Get access

Abstract

We report a dual-function chamber integrating (a) remote RF plasma-enhanced etching of SiO2 layers on Si(100) surfaces with low energy, <100 eV, ion bombardment and (b) in-situ removal of polymeric C-F residues that are formed on the exposed Si surfaces. Using direct plasma excitation of He and downstream introduction of CF4, an SiO2 etch rate of ̃5 nm/min was obtained at a CF4 partial pressure as low as 0.25 mTorr. An exposure to atomic-H at a substrate temperature of 250°C was effective in removing polymeric residues from the Si surface, while an exposure to reactive O-species was less effective. We achieved a low-temperature, ̃300°C, homoepitaxial growth of Si on the Si(100) surface that was subjected to plasma etching followed by an exposure to atomic-H. The electrical damage of the processed Si surfaces was evaluated by a new technique, where a device-quality SiO2 film was deposited on this surface by remote PECVD and the C-V characteristics of the MOS structure were measured.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable