Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T18:15:16.084Z Has data issue: false hasContentIssue false

Integrated Thin Film Capacitor Arrays Utilizing Sol-Gel Derived Ferroelectrics

Published online by Cambridge University Press:  10 February 2011

David Liu
Affiliation:
Advanced Product Technology Center, AVX Corporation, 2200 AVX Drive, B.O. Box 867, Myrtle Beach, SC 29578
Steve Makl
Affiliation:
Advanced Product Technology Center, AVX Corporation, 2200 AVX Drive, B.O. Box 867, Myrtle Beach, SC 29578
Robert H. Heistand II
Affiliation:
Advanced Product Technology Center, AVX Corporation, 2200 AVX Drive, B.O. Box 867, Myrtle Beach, SC 29578
Get access

Abstract

Niobium-doped lead zircomate titanate (PNZT) thin film dielectric material has been produced on a large scale using a thick-coating sol-gel process. The material has been applied to the fabrication of commercial integrated capacitor array devices. Compared to conventional processes, this low-cost, long-shelf-life procedure had at least a 4-fold processing time enhancement. The specific capacitance of 2500 nF/cm2 and integrated density of over 200 component/cm2 have been demonstrated. The frequency domain capacitance measurement of integrated PNZT capacitors exhibits a frequency-independent behavior up to 2 GHz when a DC bias is applied. Leakage-voltage dependence follows the space-charge-limited-current (SCLC) mechanism. The fabricated integrated capacitor arrays pass the industrial standard of reliability for discrete multilayer capacitors.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable