Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T20:21:09.375Z Has data issue: false hasContentIssue false

Interaction of Slip with Grain Boundary in the L12 Ordered Structure - a Σ = 9 Tilt Boundary*

Published online by Cambridge University Press:  26 February 2011

M. H. Yoo
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831–6115
Get access

Abstract

The role of slip/grain boundary interaction in intergranular fracture has been analyzed for a Σ = 9 tilt boundary in L12 ordered alloys by use of the anisotropic elasticity theory of dislocations and fracture. Screw superpartials cross slip easily at the boundary onto the (111) and the (001) planes for low and high temperatures, respectively. Transmission of primary slip dislocations onto the conjugate slip system occurs with some difficulty, which is eased by localized disordering. Unless a symmetric double pile-up occurs simultaneously, cleavage fracture is predicted to occur on the (111) plane, not intergranular fracture. Absorption (or emission) of superpartials occurs only when the boundary region is disordered. The inherent weakness of grain boundaries in Ni3AI and its improvement by boron segregation are discussed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable