Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T20:20:52.914Z Has data issue: false hasContentIssue false

Interactions and Stability of Cu on CoSi2

Published online by Cambridge University Press:  25 February 2011

Y. -T. Shy
Affiliation:
Materials Engineering Department and Center for Integrated Electronics, Rensselaer Polytechnic Institute, Troy, NY 12180
S. P. Murarka
Affiliation:
Materials Engineering Department and Center for Integrated Electronics, Rensselaer Polytechnic Institute, Troy, NY 12180
A. R. Sitaram
Affiliation:
Motorola Inc., Austin, TX 78721
P.-J. Ding
Affiliation:
Physics Department, State University of New York, Albany, NY 12222
W. A. Lanford
Affiliation:
Physics Department, State University of New York, Albany, NY 12222
Get access

Abstract

Copper is being investigated for application as multi-level interconnection metal in silicon ultra-large-scale integration (ULSI). On the other hand, COSi2 is being tested for application as contacts in sub-half micron ULSI circuits. Copper will thus be used on COSi2 to bring the electrical connection to the outside world. In this investigation we have therefore studied the interactions of copper with CoSi2 employing sheet resistance measurements (four-point probe), Rutherford back scattering (RBS), and X-ray diffraction (XRD). In addition the stability of the Schottky diodes, n-Si/CoS2/Cu, has been investigated as a function of the heat treatment in the range of room temperature to 600° C in argon-3% hydrogen mixture gas ambient. Both the measurements of the analytical and electrical characteristics show that Cu on n-Si/CoSi2 is stable at least up to a 30 minutes anneal at 600°C in argon-3% hydrogen medium. These results will be presented and discussed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable