Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-15T08:52:01.183Z Has data issue: false hasContentIssue false
  • English
  • Français

Interfacial Adhesion: Theory and Experiment

Published online by Cambridge University Press:  21 February 2011

John Ferrante,
Guillermo H. Bozzolo,
Clarence W. Finley and
Amitava Banerjea
John Ferrante
Affiliation:
National Aeronautics and Space Administration, Lewis Research Center, Cleveland, OH 44135
Guillermo H. Bozzolo
Affiliation:
Case Western Reserve University, Department of Physics, Cleveland, OH 4106
Clarence W. Finley
Affiliation:
Pennsylvania State University, New Kensington Campus, Chemistry Department, New Kensington, PA 15068
Amitava Banerjea
Affiliation:
National Aeronautics and Space Administration, Lewis Research Center, Cleveland, OH 44135
Get access

Abstract

Adhesion, the binding of different materials at an interface, is of general interest to many branches of technology, e.g., micro-electronics, tribology, manufacturing, construction, etc. However, there is a lack of fundamental understanding of such diverse interfaces. In addition, experimental techniques generally have practical objectives, such as the achievement of sufficient strength to sustain mechanical or thermal effects and/or have the proper electronic properties. In addition, the theoretical description of binding at interfaces is quite limited, and a proper data base for such theoretical analysis does not exist.

This presentation will review both experimental and theoretical aspects of adhesion in nonpolymer materials. The objective will be to delineate the critical parameters needed, governing adhesion testing along with an outline of testing objectives. A distinction will be made between practical and fundamental objectives. Examples will be given where interfacial bonding may govern experimental consideration. The present status of theory will be presented along with some recommendations for future progress and needs.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 119: Symposium F – Adhesions in Solids , 1988, 3
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Buckley, D.H., Surface Effects in Adhesion, Friction, Wear and Lubrication (Elsevier, New York, 1982).Google Scholar
2. Mittal, K.L., Ed., Adhesion Measurement of Thin Films, Thick Films, and Bulk Coatings, ASTM STP-640 (ASTM, Philadelphia, 1978).CrossRefGoogle Scholar
3. Panel Report on Interfaclal Bonding and Adhesion, Mater. Sci. Eng. 83, 169–234 (1986).Google Scholar
4. Mattox, D.M. and Rigney, D.A., Mater. Sci. Eng. 83, 189–195 (1986).; D.M. Mattox, in Adhesion Measurement of Thin Films, Thick Films, and Bulk Coatings, ASTM STP-640, Edited by K.L. Mittal (ASTM, Philadelphia, 1978) pp. 54–62.CrossRefGoogle Scholar
5. Hitch, T.T., in Adhesion Measurement of Thin Films, Thick Films, and Bulk Coatings, ASTM STP-640, Edited by Mittal, K.L. (ASTM, Philadelphia, 1978) pp. 211–232.CrossRefGoogle Scholar
6. Pashley, M.D. and Tabor, D., Vacuum 31, 619 (1981).CrossRefGoogle Scholar
7. Wheeler, D.R., J. Appl. Phys. 47, 1123 (1976).CrossRefGoogle Scholar
8. Pepper, S.V., J. Appl. Phys. 50, 8062 (1979) J. Appl. Phys. 47, 2579 (1976).CrossRefGoogle Scholar
9. Pepper, S.V., J. Vac. Sci. Tech. 20, 643 (1982).CrossRefGoogle Scholar
10. Binnig, G., Quate, C.F., and Gerber, C., Phys. Rev. Lett. 56, 930 (1986).Google Scholar
11. Mate, C.M., McClelland, G.M., Erlandsson, R., and Chiang, S., Phys. Rev. Lett. 59, 1942 (1987).Google Scholar
12. Vossen, J.L., in Adhesion Measurement of Thin Films, Thick Films, and Bulk Coatings, ASTM STP-640, Edited by Mittal, K.L. (ASTM, Philadelphia, 1978) pp. 122–123.Google Scholar
13. Kittel, C., Introduction to Solid State Physics, 3rd ed. (John Wiley and Sons, New York, 1966).Google Scholar
14. Ashcroft, N.W. and Mermin, N.D., Solid State Physics (Holt, Rinehart, and Winston, New York, 1976).Google Scholar
15. Clarke, D.R. and Wolf, D., Mater. Sci. Eng. 83, 197–204 (1986).Google Scholar
16. Smith, J.R. and Ferrante, J., Phys. Rev. B 34, 2238 (1986).Google Scholar
17. Yaniv, A., Phys. Rev. B 17, 3904 (1978).Google Scholar
18. Allan, G., Lannoo, M., and Dobrzynski, L., Philos. Mag. 30, 33 (1974).CrossRefGoogle Scholar
19. Pei, C.C., Phys. Rev. B 18, 2583 (1978).Google Scholar
20. Payne, M.C., Bristowe, P.D., and Joannapoulos, J.D., Phys. Rev. Lett. 58, 1348 (1987).Google Scholar
21. DiVincenzo, D.P., Alerhand, O.L., Schluter, M., and Wilkins, J.W., Phys. Rev. Lett. 56, 1925 (1986).Google Scholar
22. Thomson, R.E. and Chadi, D.J., Phys. Rev. B 29, 889 (1984).Google Scholar
23. Car, R. and Parrinello, M., Phys. Rev. Lett. 55, 2471 (1985).Google Scholar
24. Ferrante, J. and Smith, J.R., Phys. Rev. B 31, 3427 (1985).CrossRefGoogle Scholar
25. Rose, J.H., Ferrante, J., and Smith, J.R., Phys. Rev. Lett. 47, 675 (1981) J.R. Smith, J. Ferrante, and J.H. Rose, Phys. Rev. B 25, 1419 (1982) J. Ferrante, J.R. Smith, and J.H. Rose, Phys. Rev. Lett. 50, 1385 (1983) J.R. Smith, J.H. Rose, J. Ferrante, and F. Guinea, in Many Body Phenomena at Surfaces, Edited by D. Langreth and H. Suhl, (Academic Press, New York, 1984) pp. P. Vinet, J. Ferrante, J.R. Smith, and J.H. Rose, J. Phys. C 19, L467 (1986).Google Scholar
26. Foiles, S.M., Baskes, M.I., and Daw, M.S., Phys. Rev. B 33, 7983 (1986).Google Scholar
27. Norskov, J.K. and Lang, N.D., Phys. Rev. B 21, 2131 (1980).CrossRefGoogle Scholar
28. Stott, M.J. and Zaremba, E., Phys. Rev. B 22, 1564 (1980).CrossRefGoogle Scholar
29. Smith, J.R. and Banerjea, A., Phys. Rev. Lett 59, 2451 (1987).CrossRefGoogle Scholar
30. Smith, J.R. and Banerjea, A., To be Published J. Vac. Sci. Technol.Google Scholar
31. Smith, J. R., Private Communication.Google Scholar
32. Campbell, D.S., in Handbook of Thin Film Technoloqy, Edited by Maissel, L.I. and Glang, R., (McGraw-Hill Book Co., New York, 1970) Chapt. 12.Google Scholar