Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-15T22:46:00.459Z Has data issue: false hasContentIssue false
  • English
  • Français

Interfacial Force Microscopy and its Application in Metal Matrix Composites

Published online by Cambridge University Press:  17 March 2011

Berthold E. Liebig,
Athanasios Chantis,
Craig E. Steffan,
Jan A. Puszynski and
Robb M. Winter
Berthold E. Liebig
Affiliation:
College of Materials Science and Engineering South Dakota School of Mines and Technology, Rapid City, SD 57701, U.S.A.
Athanasios Chantis
Affiliation:
College of Materials Science and Engineering South Dakota School of Mines and Technology, Rapid City, SD 57701, U.S.A.
Craig E. Steffan
Affiliation:
College of Materials Science and Engineering South Dakota School of Mines and Technology, Rapid City, SD 57701, U.S.A.
Jan A. Puszynski
Affiliation:
College of Materials Science and Engineering South Dakota School of Mines and Technology, Rapid City, SD 57701, U.S.A.
Robb M. Winter
Affiliation:
College of Materials Science and Engineering South Dakota School of Mines and Technology, Rapid City, SD 57701, U.S.A.
Get access

Abstract

Metal matrix composites (MMCs) combine the properties of metal and ceramic or intermetallic materials. Common examples of metal matrix composites are Cu-Al2O3, SiCw-Al, Al-Al2O3, Al-B4C, and Ni-NiAl3. Mechanical or thermal properties, such as strain-stress behavior, or thermal expansion coefficient can be tailored by changing the content of the reinforcing phase. The most common techniques of measuring mechanical properties of composite materials rely on macroscopic approach. During the past fifteen years, a significant effort has been made to develop various techniques of measuring mechanical properties on a microscopic level. These techniques include atomic force microscope (AFM) and depth sensing indentation techniques, based on Hertzian contact mechanics. However, it is still a challenge to measure reliably and quantitatively the Young's modulus and Poisson's ratio of individual phases as well as properties at the interfaces. This presentation will focus on fundamental aspects of measuring of mechanical properties of metal matrix composites at nano-scale using Interfacial Force Microscopy (IFM). The IFM is a scanning probe microscope, which utilizes a unique self-balancing capacitance force sensor. Force-displacement curves obtained with the IFM are analyzed using Hertzian contact mechanics to extract the Young's moduli of the individual phases and interface region with high spatial resolution. The properties of Cu-Al2O3, Al-SiCp composites will be discussed in detail. Furthermore, a comparison of experimental data with mechanical properties calculated from first principles will be discussed.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 697: Symposium P – Surface Engineering 2001--Fundamentals and Applications , January 2001, P8.21
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Houston, J. E. and Winter, R. M., Polymer Preprints, 41, 1454 (2000).Google Scholar
2. Khanna, S. K., Paruchuri, K., Ranganthan, P. and Winter, R. M., Proceeding of Soc. Exp. Mech. IX. Int. Congress and Ex. (Orlando, FL ) 916 (2000).Google Scholar
3. Steffan, C. E., Liu, H., Winter, R. M., Cabibil, H., Lozano, J., Celio, H., Proceeding of Soc. Exp. Mech. IX. Int. Congress and Ex. (Orlando, FL) 920 (2000).Google Scholar
4. Cabibil, H., Celio, H., Lozano, J., White, J. M. and Winter, R. M., Langmuir 17 2160 (2001).Google Scholar
5. Landau, L. D. and Lifshitz, E. M., Theory of Elastisity 3d ed. (Butterworth-Heinemann New York, 1995).Google Scholar
6. Johnson, K. L., Contact Mechanics 1st ed. (Cambridge University Press, New York, 1999) pp.84–104.Google Scholar
7. Fischer-Cripps, A. C., Introduction to Contact Mechanics 1st ed. (Springer-Verlag New York, 2000).Google Scholar
8. Tangyunyoung, P., Thomas, R. C., Houston, J. E., Michalske, T.A., Crooks, R. M. and Howard, A. J. Adhesion Science Technology 8, 897 (1994).Google Scholar
9. Houston, J. E., Michalske, T.A., Materials Res. Soc. Proc., 436, 3 (1997).Google Scholar
10. Kiely, J. D. and Houston, J. E., Langmuir 15, 4513 (1999).Google Scholar
11. Johnson, K.L., Kendall, K., Roberts, A. D., Proc.Roy.Soc.London A324, 301 (1971).Google Scholar
12. Maugis, D., J.Coll.Interphace Sci. 150(1), 243 (1992).Google Scholar
13. Shackelford, J. F. (Editor), Alexander, W., CRC Handbook of Material Science and Engineering 3rd ed. (CRC Press, Boca Raton, Fl, 2000).Google Scholar
14. Salvi, Alex (private communication). Metal Matrix Cast Composite Inc (2001).Google Scholar