Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T12:06:50.554Z Has data issue: false hasContentIssue false

Interfacial Fracture of Thin Polymer Films on Aluminum

Published online by Cambridge University Press:  01 February 2011

A. Strojny
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455 now with Xerox Corporation, Webster, NY 14580
N. R. Moody
Affiliation:
Sandia National Laboratories, Livermore CA 94550
J. A. Emerson
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185
W. R. Even Jr
Affiliation:
Sandia National Laboratories, Livermore CA 94550
W. W. Gerberich
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455
Get access

Abstract

In this study we combined nanoindentation techniques with mechanics-based models to determine interfacial fracture energies in a 16 μm thick styrene-acrylate film on T-6061 aluminum sheet and a 1.6 μm thick Epon 828/T403 epoxy film on sputtered aluminum. For the styrene-acrylate film, interfacial fracture occurred at a fracture energy of 8.9 J/m2. The epoxy film failed much more readily with a fracture energy of 0.2 J/m2. However, the addition of an adhesion-promoting interlayer improved the epoxy film performance to the point where the films did not fail even when the indentations exceeded the film thickness.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable