Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T09:20:30.426Z Has data issue: false hasContentIssue false

Internal Stress Measurement on CVD diamond Coatings by X-ray Diffraction and Raman Spectroscopy

Published online by Cambridge University Press:  15 February 2011

K. Van Acker
Affiliation:
Departement Metaalkunde en Toegepaste Materiaalkunde (MTM), Katholieke Universiteit Leuven, de Croylaan 2, B-3001 Leuven, Belgium
H. Mohrbacher
Affiliation:
Departement Metaalkunde en Toegepaste Materiaalkunde (MTM), Katholieke Universiteit Leuven, de Croylaan 2, B-3001 Leuven, Belgium
B. Blanpain
Affiliation:
Departement Metaalkunde en Toegepaste Materiaalkunde (MTM), Katholieke Universiteit Leuven, de Croylaan 2, B-3001 Leuven, Belgium
P. Van Houtte
Affiliation:
Departement Metaalkunde en Toegepaste Materiaalkunde (MTM), Katholieke Universiteit Leuven, de Croylaan 2, B-3001 Leuven, Belgium
J.P. Celis
Affiliation:
Departement Metaalkunde en Toegepaste Materiaalkunde (MTM), Katholieke Universiteit Leuven, de Croylaan 2, B-3001 Leuven, Belgium
Get access

Abstract

Internal stresses are measured in CVD diamond coatings deposited on a variety of substrate materials by low incident beam angle X-ray diffraction and by micro-Raman spectroscopy. The X-ray diffraction technique gives an integral stress value over a comparably large coating area whereas the Raman technique results in localized stress information with a lateral resolution of down to 1 µm. The stress values obtained from both methods compare well for diamond coatings of 6 μm thickness whereas a difference is observed for thicker coatings.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable