Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-19T04:34:25.432Z Has data issue: false hasContentIssue false

Intrinsic Stress in a-Germanium Films Deposited by RF-Magnetron Sputtering

Published online by Cambridge University Press:  22 February 2011

D. Fahnline
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
B. Yang
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
K. Vedam
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
R. Messier
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
L. Pilione
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
Get access

Abstract

Thin a-Ge films deposited by rf-magnetron sputtering undergo a change from compressive to tensile stress as the argon gas pressure is increased. Spectroscopic ellipsometry, neutron activation analysis, and a dual laser beam reflection technique were used to determine the film's void fraction content, Ar/Ge atomic percent, and stress, respectively. The results of these three measurements indicate that as the film's Ar/Ge content increases, the void fraction decreases and the intrinsic stress becomes compressive. These findings are consistent with currently accepted bombardment mechanisms.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable