Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-19T05:36:57.931Z Has data issue: false hasContentIssue false

Investigation of Amorphous IGZO TFT Employing Ti/Cu Source/Drain and SiNx Passivation

Published online by Cambridge University Press:  12 July 2011

Young Wook Lee
Affiliation:
School of Electrical Engineering, Seoul National University, Gwanak-gu, Seoul 151-742, Korea
Sung-Hwan Choi
Affiliation:
School of Electrical Engineering, Seoul National University, Gwanak-gu, Seoul 151-742, Korea
Jeong-Soo Lee
Affiliation:
School of Electrical Engineering, Seoul National University, Gwanak-gu, Seoul 151-742, Korea
Jang-Yeon Kwon
Affiliation:
Department of Material Science and Engineering, Seoul National University, Gwanak-gu, Seoul 151-742, Korea
Min-Koo Han
Affiliation:
School of Electrical Engineering, Seoul National University, Gwanak-gu, Seoul 151-742, Korea
Get access

Abstract

We successfully fabricated a-IGZO TFTs employing a Ti/Cu source/drain (S/D) and SiNx passivation in order to reduce the line-resistance, as compared to most oxide TFTs that use Mo (or TCO) and SiO2 for their S/D and passivation, respectively. Although passivated with SiNx, the TFT exhibits good transfer characteristics without a negative shift. However, the TFT employing a Mo S/D exhibited conductor-like characteristics when passivated with SiNx. Our investigation suggests that the IGZO oxygen vacancies found in the Ti/Cu S/D are controlled, resulting in low concentrations, and so prevent the SiNx-passivated TFT from having a negative shift.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable