Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-18T02:58:22.227Z Has data issue: false hasContentIssue false

Investigation of Textured Back Reflectors for Microcrystalline Silicon Based Solar Cells

Published online by Cambridge University Press:  15 February 2011

O. Kluth
Affiliation:
Institut für Schicht und Ionentechnik – Photovoltaik, Forschungszentrum Jülich, D-52425 Jülich, Germany, o.kluth@fz-juelich.de
O. Vetterl
Affiliation:
Institut für Schicht und Ionentechnik – Photovoltaik, Forschungszentrum Jülich, D-52425 Jülich, Germany
R. Carius
Affiliation:
Institut für Schicht und Ionentechnik – Photovoltaik, Forschungszentrum Jülich, D-52425 Jülich, Germany
F. Finger
Affiliation:
Institut für Schicht und Ionentechnik – Photovoltaik, Forschungszentrum Jülich, D-52425 Jülich, Germany
S. Wieder
Affiliation:
Institut für Schicht und Ionentechnik – Photovoltaik, Forschungszentrum Jülich, D-52425 Jülich, Germany
B. Rech
Affiliation:
Institut für Schicht und Ionentechnik – Photovoltaik, Forschungszentrum Jülich, D-52425 Jülich, Germany
H. Wagner
Affiliation:
Institut für Schicht und Ionentechnik – Photovoltaik, Forschungszentrum Jülich, D-52425 Jülich, Germany
Get access

Abstract

Microcrystalline silicon (μc-Si:H) solar cells require an effective light trapping in the near infrared (NIR) to enhance the long wavelength spectral response. For this purpose we investigated back reflectors based on texture-etched ZnO/Ag stacks prepared on glass substrates by magnetron sputtering. With decreasing sputter pressure the resulting surface texture of the glass/Ag/ZnO substrates after etching exhibits a larger feature size and root mean square roughness. The increase in feature size corresponds to an increase of diffuse reflectivity. Applied in microcrystalline solar cells prepared by VHF plasma enhanced chemical vapour deposition (PECVD), the reflectors showing the largest feature size (prepared at the lowest possible sputter pressure) yielded the highest long wavelength spectral response. The μc-Si n-i-p cells prepared on the latter back reflector exhibited efficiencies of 6.9 % (short circuit current density jsc= 18.8 mA/cm2) and 7.5 % (jsc=25 mA/cm2) for an i-layer thickness of 1 μm and 3.5 μm, respectively.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable