Hostname: page-component-7b7567c8c-8rbv8 Total loading time: 0 Render date: 2026-11-18T10:31:27.153Z Has data issue: false hasContentIssue false

Ion Implantation for Silicon Carbide Electronic Devices

Published online by Cambridge University Press:  21 March 2011

Michael A. Capano*
Affiliation:
Purdue University, School of Electrical and Computer Engineering, West Lafayette, IN
Get access

Abstract

As the demands on electronic systems intended for high temperature, high power or high frequency operation increase, silicon-based electronics are being pushed to its fundamental material limits. Consequently, continued improvement in system level performance for these applications requires new semiconductor materials. Silicon carbide (SiC) is a candidate material for the applications listed above, but considerable materials, processing, and device research are still needed before SiC devices are brought to market.

This paper concentrates on ion implantation processing of SiC, and attempts to illustrate specific problems associated with ion implantation. Data from a series of experiments relevant to SiC MOSFETs are presented for this purpose. Ion implants into SiC are discussed first to show how a strategy for improving the acceptor activation ratio from less than 1% to nearly 100% is developed. The annealing temperatures (>1600°C) needed to attain high activation ratios lead to severely roughened surfaces. Results from experiments designed to preserve high-quality surfaces have been encouraging from a purely materials perspective. However, these solutions do not translate into improved transport characteristics for SiC MOSFETs. An investigation of inversion layer mobility in 4H-SiC MOSFETs is presented to illustrate this point.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable