Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-12T16:34:15.327Z Has data issue: false hasContentIssue false

The JNC Generic URL Research Program - Providing a Knowledge Base to Support both Implementer and Regulator in Japan

Published online by Cambridge University Press:  21 March 2011

Hiroyuki Umeki
Affiliation:
Nuclear Cycle Backend Division, Japan Nuclear Cycle Development Institute, 4-49, Muramatsu, Tokai-mura, Naka, Ibaraki, 319-1184, Japan
Kazuhiko Shimizu
Affiliation:
Nuclear Cycle Backend Division, Japan Nuclear Cycle Development Institute, 4-49, Muramatsu, Tokai-mura, Naka, Ibaraki, 319-1184, Japan
Toshihiro Seo
Affiliation:
Nuclear Cycle Backend Division, Japan Nuclear Cycle Development Institute, 4-49, Muramatsu, Tokai-mura, Naka, Ibaraki, 319-1184, Japan
Akira Kitamura
Affiliation:
Nuclear Cycle Backend Division, Japan Nuclear Cycle Development Institute, 4-49, Muramatsu, Tokai-mura, Naka, Ibaraki, 319-1184, Japan
Hirohisa Ishikawa
Affiliation:
Nuclear Cycle Backend Division, Japan Nuclear Cycle Development Institute, 4-49, Muramatsu, Tokai-mura, Naka, Ibaraki, 319-1184, Japan
Get access

Abstract

In accordance with the R&D framework specified by the Atomic Energy Commission of Japan in 2000 for the implementing phase of HLW disposal, the Japan Nuclear Cycle Development Institute (JNC) continues to be responsible for R&D activities aimed at enhancing the reliability of disposal technologies and safety assessment methodologies and associated databases. JNC has thus been actively promoting technical R&D with a view to contributing to both the implementation of disposal and the formulation of safety regulations.

One of JNC's key roles is to establish and demonstrate site characterization methodologies based on investigations in two purpose-built generic URL (underground research laboratory) projects: one at Mizunami in crystalline rock and the other at Horonobe in sedimentary rock.

Through the surface-based investigations in the Mizunami and Horonobe projects (phase 1), integration of work from different disciplines into a “geosynthesis” has been illustrated and is planned to be developed further in the underground facilities at these sites (phases 2 and 3). These projects also serve for developing and testing the tools and methodologies required for site characterization. Further know-how will be gained through participation in foreign underground laboratory projects, transfer of experience from these projects to Japan and tailoring it to Japanese conditions and requirements.

This experience represents an important knowledge base, which is obviously important for the implementer but is also needed by the regulator, in order to assess how key site characteristics are derived and what uncertainties are associated with this process.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable