Hostname: page-component-7b7567c8c-2rsb6 Total loading time: 0 Render date: 2026-11-13T11:20:18.845Z Has data issue: false hasContentIssue false
  • English
  • Français

Kinetics and Morphology in Rapid Solidification

Published online by Cambridge University Press:  21 February 2011

H. W. Bergmann and
H. U. Fritsch
H. W. Bergmann
Affiliation:
Institut für Werkstoffkunde und Werkstofftechnik, Technische Universität Clausthal, D-3392 Clausthal-Zellerfeld, FRG
H. U. Fritsch
Affiliation:
Institut für Werkstoffkunde und Werkstofftechnik, Technische Universität Clausthal, D-3392 Clausthal-Zellerfeld, FRG
Get access

Abstract

The important parameters in all descriptions of the kinetics of crystallization behaviour are the differences in free energy Δgv between the liquid (glassy) phase and the various stable and metastable crystalline phases. The various quenching techniques can be subdivided into those in which the cooling rate is determined by the heat diffusivity and those in which the heat transfer coefficient is important. The temperature gradient and the solidification rates are different in the two cases. An additional difference is the nucleation rate which is dependent on the degree of undercooling.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 28: Symposium F – Rapidly Solidified Metastable Materials , 1983, 3
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Cline, H. E. and Anthony, T. R., J. Appl. Phys. 48, 3888 and 3895 (1977).Google Scholar
2. Henry, P., Chande, T., Lipscombe, K., Mazumder, J. and Steen, W. M., L.I.A. 31, ICALEO, 25 (1982).Google Scholar
3. Klemens, P. G., J. AppI. Phys. 47, 2165 (1976).10.1063/1.322866Google Scholar
4. Jones, H. in: Rapid Solidification Processing: Principles and Technologies, Mehrabian, R., Kear, B. H. and Cohen, M., eds. (Claitor's Publishing Division, Baton Rouge 1978) pp. 28 – 45.Google Scholar
5. Kalinichenko, A. S., Bergmann, H. W., Aluminium, in print.Google Scholar
6. Yavari, A. R., Hicter, P., Desre, P., Proc. 4th Int. Conf. Rap. Quen. Met., 713 (1982).Google Scholar
7. Uhlmann, D. R., Mat. Science Research 4, 172 (1969).Google Scholar
8. Jackson, K. A. in: Solidification, (American Society for Metals, Metals Park, 1971) pp. 121 – 154.Google Scholar
9. Christian, J. W., The Theory of Transformations in Metals and Alloys (Pergamon Press, Oxford, 1965).Google Scholar
10. Bergmann, H. W., Fritsch, H. U. and Sprusil, B. in: Phase Transformations in Crystalline and Amorphous Alloys, Mordike, B. L., ed. (Deutsche Gesellschaft für Metallkunde, Oberursel, 1983) pp. 199 – 222.Google Scholar
11. Battezzati, L., Ber. Bunsenges. Phys. Chem., in print.Google Scholar
12. Baker, J. C. and Cahn, J. W. in: Solidification (American Society for Metals, Metals Park, 1971) pp. 23 – 58.Google Scholar
13. Bergmann, H. W., Fritsch, H. U. and Hunger, G., J. Mat. Sci. 16, 1935 – 1944 (1981).10.1007/BF00540642Google Scholar
14. Müller, K. and Heimendahl, M. v., J. Mat. Sci. 17, 2525 – 2532 (1982).10.1007/BF00543883Google Scholar
15. Herold, U., Dissertation, Universitāt Bochum, 1983.Google Scholar
16. Bergmann, H. W., Brokmeier, U. and Fritsch, H. U., Ber. Bunsenges. Phys. Chem. 87, 757 – 761 (1983).10.1002/bbpc.19830870908Google Scholar
17. Giessen, B. C., Proc. 2nd Int. Conf. Rap. Quen. Met., Sec. I, 119 (1976).Google Scholar
18. Mehrabian, R., Kou, S., Hsu, S. C. and Munitz, A., AIP Conf. Proc. 50, 129 – 148 (1979).10.1063/1.31653Google Scholar
19. Bergmann, H. W., Barton, G., Mordike, B. L. and Fritsch, H. U., this volume.Google Scholar
20. Solidification (American Society for Metals, Metals Park, 1971).Google Scholar
21. Kurz, W. and Sahm, P. R., Gerichtet erstarrte eutektische Werkstoffe (Springer Verlag, Berlin, 1975).10.1007/978-3-642-65993-5Google Scholar
22. Mordike, B. L. and Bergmann, H. W., this volume.Google Scholar