Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-19T02:40:12.364Z Has data issue: false hasContentIssue false

A Large Grain Polycrystalline Silicon Film for Resistive Bolometers

Published online by Cambridge University Press:  01 February 2011

Tae-Sik Kim
Affiliation:
Department of Electrical Engineering and Computer Science Korea Advanced Institute of Science and Technology (KAIST), 373–1, Kusong-dong, Yusong-gu, Taejon 305–701, Korea
Hee Chul Lee
Affiliation:
Department of Electrical Engineering and Computer Science Korea Advanced Institute of Science and Technology (KAIST), 373–1, Kusong-dong, Yusong-gu, Taejon 305–701, Korea
Get access

Abstract

Large grain polycrystalline silicon films as a sensing material for infrared bolometers have been proposed and investigated. Using a seed selection through ion channeling technique, we have successfully increased the average grain size of polysilicon films up to 1670Å. The achieved TCR value at 20°C and grain boundary defect density of the film are found to be as high as -2.46%/K for a resistivity of 30Ωcm and to be about 1.752×1012/cm2, respectively. From the measurement of noise characteristics of the film, the value of k, 1/f noise parameter, is calculated to be 1.35×10-9. As a result, the estimated detectivity is found to be 5.6×108cmHz1/2/W.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable