Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T15:19:05.256Z Has data issue: false hasContentIssue false

Laser Lateral Crystallization of Thin Au and Cu Films on SiO2

Published online by Cambridge University Press:  01 February 2011

J.E. Kline
Affiliation:
Department of Materials Science and Engineering, University of Pittsburgh, Pittsburgh, PA 15261
J.P. Leonard
Affiliation:
Department of Materials Science and Engineering, University of Pittsburgh, Pittsburgh, PA 15261
Get access

Abstract

Rapid lateral solidification via excimer laser melt processing is demonstrated in 200 nm thick pure Cu and Au films, encapsulated above and below by amorphous SiO2. Mask projection irradiation is used to selectively melt lines 3 to 30 m wide in the metal films, with lateral solidification proceeding transversely from the edge to the middle of the line. Encapsulation with the SiO2 overlayer and control of the fluence are found to be crucial parameters necessary to prevent dewetting while the films are molten. Transmission electron microscopy reveals large columnar grains with twin structures and other defects typical of rapid solidification.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable