Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-18T03:06:09.419Z Has data issue: false hasContentIssue false

Laser-Assisted Liquid-Phase Etching of Copper Conductors and its Application to Advanced Integrated Circuit Interconnect

Published online by Cambridge University Press:  26 February 2011

Robert F. Miracky
Affiliation:
Microelectronics and Computer Technology Corporation (MCC) 12100 Technology Blvd., Austin, TX 78727
Kantesh Doss
Affiliation:
Microelectronics and Computer Technology Corporation (MCC) 12100 Technology Blvd., Austin, TX 78727
Get access

Abstract

We have demonstrated a method f or the selective-area, laser-assisted liquid-phase etching of 6-μm thick copper conductors, by focusing the 488-μm line of an argon ion laser onto the surface of samples immersed in a dilute solution containing sulfuric acid and hydrogen peroxide. Average etch rates of up to 5.0 μm/s have been achieved, in the process of completely severing 14-μm wide copper lines, with little attendant damage to the underlying layer of polyimide. Two etchant formulations were identified which exhibited large etch rates at elevated temperatures and low enough background etch rates (approximately 1 μm/hr at 0 °C) to be useful in practical applications.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable