Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T02:37:12.343Z Has data issue: false hasContentIssue false

Li Batteries with Porous Sol-Gel Cathodes

Published online by Cambridge University Press:  26 February 2011

Antonela Dima
Affiliation:
antonela.dima@na.imm.cnr.it, Institute for Microelectronics and Microsystems, Department of Naples, National Council of Research, via Pietro Castellino 111, Neaples, 80131, Italy
Maurizio Casalino
Affiliation:
maurizio.casalino@na-imm.cnr.it, Institute for Microelectronics and Microsystems, Neaples, 80131, Italy
Francesco Della Corte
Affiliation:
francesco.dellacorte@na.imm.cnr.it, Institute for Microelectronics and Microsystems, Neaples, 80131, Italy
Ivo Rendina
Affiliation:
ivo.rendina@na.imm.cnr.it, Institute for Microelectronics and Microsystems, Neaples, 80131, Italy
Get access

Abstract

Lithium batteries have found a wide range of applications due to their very compact energy packing and effective cost. Theoretically Li-cells can hold up to 5V, however to date no mass-produced rechargeable battery surpasses 4 V. The structure here analyzed consists of: lithium porous cathode, solid electrolyte and silver anode. A spinel LiNi0.4X0.1Mn1.5O4 sol-gel layer was deposited on a porous substrate in order to obtain higher specific surface for single chips. The anode was thermally evaporated Ag. The electrolyte used was a sol-gel hybrid layer containing Li ions. The devices, fabricated on ceramic wafers, displayed high capacities.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable