Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T23:40:50.779Z Has data issue: false hasContentIssue false

Logic Devices with Spin Wave Buses - an Approach to Scalable Magneto-Electric Circuitry

Published online by Cambridge University Press:  01 February 2011

Alexander Khitun
Affiliation:
ahit@ee.ucla.edu, University of California Los Angeles, Electrical Engineering, 420 Westwood Plaza, Engineering IV Bldg., Room 66-127G, Los Angeles, CA, 90095-1594, United States, (310)206-7987, (310)206-8495
Mingqiang Bao
Affiliation:
baoming@ee.ucla.edu, University of California Los Angeles, Electrical Engineering, Los Angeles, CA, 90095-1594, United States
Yina Wu
Affiliation:
yina@ee.ucla.edu, University of California Los Angeles, Electrical Engineering, Los Angeles, CA, 90095-1594, United States
Ji-Young Kim
Affiliation:
hbt100@ee.ucla.edu, University of California Los Angeles, Electrical Engineering, Los Angeles,, CA, 90095-1594, United States
Augustin Hong
Affiliation:
ajhong@ee.ucla.edu, University of California Los Angeles, Electrical Engineering, Los Angeles, CA, 90095-1594, United States
Ajey P Jacob
Affiliation:
ajey.p.jacob@intel.com, TMG External Programs, Intel Corporation and Western Institute of Nanoelectronics, Los Angeles, CA, 90095-1594, United States
Kosmas Galatsis
Affiliation:
kos@ee.ucla.edu, University of California Los Angeles, Electrical Engineering, Los Angeles, CA, 90095-1594, United States
Kang L Wang
Affiliation:
wang@ee.ucla.edu, University of California Los Angeles, Electrical Engineering, Los Angeles, CA, 90095-1594, United States
Get access

Abstract

We analyze spin wave-based logic circuits as a possible route to building reconfigurable magnetic circuits compatible with conventional electron-based devices. A distinctive feature of the spin wave logic circuits is that a bit of information is encoded into the phase of the spin wave. It makes possible to transmit information as a magnetization signal through magnetic waveguides without the use of an electric current. By exploiting sin wave superposition, a set of logic gates such as AND, OR, and Majority gate can be realized in one circuit. We present experimental data illustrating the performance of a three-terminal micrometer scale spin wave-based logic device fabricated on a silicon platform. The device operates in the GHz frequency range and at room temperature. The output power modulation is achieved via the control of the relative phases of two input spin wave signals. The obtained data shows the possibility of using spin waves for achieving logic functionality. The scalability of the spin wave-based logic devices is defined by the wavelength of the spin wave, which depends on the magnetic material and waveguide geometry. Potentially, a multifunctional spin wave logic gate can be scaled down to 0.1μm2. Another potential advantage of the spin wave-based logic circuitry is the ability to implement logic gates with fewer elements as compared to CMOS-based circuits in achieving same functionality. The shortcomings and disadvantages of the spin wave-based devices are also discussed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable