Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T23:31:31.240Z Has data issue: false hasContentIssue false

Low Cost Environmental Sensors Using Zinc Oxide Nanowires and Nanostructures

Published online by Cambridge University Press:  13 July 2012

Nima Mohseni Kiasari
Affiliation:
Department of Electrical and Computer Engineering, University of British Columbia 2332 Main Mall, Vancouver BC V6T 1Z4, Canada.
Saeid Soltanian
Affiliation:
Department of Electrical and Computer Engineering, University of British Columbia 2332 Main Mall, Vancouver BC V6T 1Z4, Canada.
Bobak Gholamkhass
Affiliation:
Department of Electrical and Computer Engineering, University of British Columbia 2332 Main Mall, Vancouver BC V6T 1Z4, Canada.
Peyman Servati
Affiliation:
Department of Electrical and Computer Engineering, University of British Columbia 2332 Main Mall, Vancouver BC V6T 1Z4, Canada.
Get access

Abstract

Zinc oxide (ZnO) nanowires (NW) are grown on both silicon and sapphire substrates using conventional chemical vapor deposition (CVD) system. As-grown nanostructures are characterized by scanning electron microscope (SEM), X-ray diffraction (XRD) as well as energy dispersive spectroscopy (EDS) and the results confirm high-quality c-axis growth of single-crystalline zinc oxide nanowires. Nanowire are dispersed in solvent and then placed between micro-patterned gold electrodes fabricated on silicon wafers using low cost and scalable dielectrophoresis (DEP) process for fabrication of oxygen and humidity sensors. These sensors are characterized in a vacuum chamber connected to a semiconductor analyzer. Current-voltage characteristics of each device are systematically investigated under different hydrostatic pressure of various gaseous environments such as nitrogen, argon, dry and humid air. It is observed that the electrical conductivity of the nanowires is significantly dependent on the number of oxygen and water molecules adsorbed to the surface of the metal oxide nanowire. These results are critical for development of low cost metal oxide sensors for high performance ubiquitous environmental sensors of oxygen and humidity.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable