Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T09:35:16.467Z Has data issue: false hasContentIssue false

Low Temperature SiNx as a Sacrificial Layer in Novel Device Fabrication

Published online by Cambridge University Press:  22 February 2011

J. R. Lothian
Affiliation:
AT&T Bell Laboratories, Murray Hill, NJ 07974
F. Ren
Affiliation:
AT&T Bell Laboratories, Murray Hill, NJ 07974
S. J. Pearton
Affiliation:
AT&T Bell Laboratories, Murray Hill, NJ 07974
C. R. Abernathy
Affiliation:
AT&T Bell Laboratories, Murray Hill, NJ 07974
B. Tseng
Affiliation:
AT&T Bell Laboratories, Murray Hill, NJ 07974
W. S. Hobson
Affiliation:
AT&T Bell Laboratories, Murray Hill, NJ 07974
Get access

Abstract

In this paper we will describe applications of a low temperature SiNx for the novel fabrication of lasers and FET's. Sidewall roughness which appears on dry etched semiconductor laser mesas is a common problem in laser fabrication. Protecting the sidewall with a low temperature PECVD SiNx can greatly reduce laser mesa roughness that occurs during dry etching of the mesa. Another application uses low temperature SiNx to extend the resolution of standard optical replication. Submicron gate fingers in field effect transistors can be fabricated by using this low-temperature SiNx deposition. By depositing SiNx on the photoresist gate pattern and etching back the SiNx leaving a sidewall, this will reduce the opening of gate features. Submicron gate length MESFETs have been demonstrated with this technique which showed comparable results to conventional submicron MESFETs fabricated with E-beam direct writing.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable