Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T17:29:34.349Z Has data issue: false hasContentIssue false

Macroporous Morphology Induced by Phase Separation in Sol-Gel Systems Derived from Titania Colloid

Published online by Cambridge University Press:  01 February 2011

Junko Konishi
Affiliation:
Department of Material Chemistry, Graduate School of Engineering, Kyoto University, Kyotodaigakukatsura, Nishikyo-ku, Kyoto 615–8510, Japan.
Koji Fujita
Affiliation:
Department of Material Chemistry, Graduate School of Engineering, Kyoto University, Kyotodaigakukatsura, Nishikyo-ku, Kyoto 615–8510, Japan.
Kazuki Nakanishi
Affiliation:
Department of Material Chemistry, Graduate School of Engineering, Kyoto University, Kyotodaigakukatsura, Nishikyo-ku, Kyoto 615–8510, Japan.
Kazuyuki Hirao
Affiliation:
Department of Material Chemistry, Graduate School of Engineering, Kyoto University, Kyotodaigakukatsura, Nishikyo-ku, Kyoto 615–8510, Japan.
Get access

Abstract

Macroporous titania gels have been prepared by the sol-gel method starting from aqueous colloidal dispersion of titania. The use of titania sol instead of highly reactive titanium alkoxide allows us to control the rate of gelation. Macroporous morphology is formed when the transitional structure of phase separation is fixed as permanent structures by the sol-gel transition. The domain size can be controlled reproducibly by changing the starting composition. The crystal structure of the titania gel is transformed from anatase to rutile through the heat treatment at 900°C, while the macroporous morphology remains unchanged.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable