Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T16:53:16.611Z Has data issue: false hasContentIssue false

Magnetron Sputtered Ti-Basis Hard Material Coatings on Thermoplastic Polymers for Applications in Particle Sensitive Environments

Published online by Cambridge University Press:  10 February 2011

E. Lugscheider
Affiliation:
Materials Science Institute, University of Technology Aachen, Augustinerbach 4-22, 52056 Aachen, Germany
S. Barwulf
Affiliation:
Materials Science Institute, University of Technology Aachen, Augustinerbach 4-22, 52056 Aachen, Germany
C. Barimani
Affiliation:
Materials Science Institute, University of Technology Aachen, Augustinerbach 4-22, 52056 Aachen, Germany
M. Riester
Affiliation:
IBM Storage Systems Germany GmbH, Hechtsheimer StraBe 2, 55131 Mainz, Germany
H. Hilgers
Affiliation:
IBM Storage Systems Germany GmbH, Hechtsheimer StraBe 2, 55131 Mainz, Germany
Get access

Abstract

Even under demanding environments, like clean rooms, polymers are already used in different-ranges of applications. The wear and particle generation within a specific particle size even under-mechanical stress is a limiting factor. So it was the aim to develop an innovative material-concept, that enables to apply a thermoplastic polymer coated with a thin hard material (thickness-up to 2.5 gm), which also prevents for electrostatical discharges and is usable for complex-bodies. Therefore it was necessary to improve the wear resistance and the adherence between the-polymer and the coating. To take also economic aspects into consideration a two step production-process sequence was required, consisting of the injection moulding process and then the plasma-deposition process including a plasma pre-treatment. In this investigation, poly(butyleneterephthalate)-(PBT) and poly(amide) 6.6 (PA) and polycarbonate (PC) were chosen as substrate-material. The coating materials used, which were mainly deposited by Magnetron Sputter Ion-Plating (MSIP), were on titanium basis (Ti-N). To get detailed chemical information about the-coatings and the interfacial region they were analyzed by X-Ray Photoelectron Spectroscopy-(XPS), additionally Secondary Ion Mass Spectrometry (SIMS) experiments were carried out to-confirm the results. The process parameter's influence on the microstructure, which extend from-amorphous to columnar (crystalline), and the film thickness were analyzed by SEM. It will be-shown and discussed, that it is possible to improve the coating's adherence by plasmapretreatment-as well as to reduce the particle generation after a suitable etching and coating process.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable