Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T18:35:24.718Z Has data issue: false hasContentIssue false

Material and Electrical Properties of Gate Dielectrics Grown by Rapid Thermal Processing

Published online by Cambridge University Press:  26 February 2011

J. Nulman
Affiliation:
School of Electrical Engineering and National Research and Resource Facility for Submicron Structures, Cornell University, Ithaca, NY 14853.
J. P. Krusius
Affiliation:
School of Electrical Engineering and National Research and Resource Facility for Submicron Structures, Cornell University, Ithaca, NY 14853.
P. Renteln
Affiliation:
School of Material Science and Engineering, Cornell University, Ithaca, NY 14853.
Get access

Abstract

The material and electrical characteristics of silicon dielectric films prepared via Rapid Thermal Processing (RTP) are described. A commercial RTP system with heat provided by tungsten-halogen lamps was used. Silicon dioxide films were grown in pure oxygen and in oxygen with 4% hydrogen chloride ambients. As grown films were either annealed in a nitrogen ambient or nitrided in an ammonia ambient. Film thickness ranges from 4 to 70 nm for RTP times from 0 to 300 s at 1150 C. Current-voltage and capacitance-voltage methods were used for electrical characteristics. Ellipsometry, Auger and TEM were used for material characterization.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable