Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T10:21:51.664Z Has data issue: false hasContentIssue false

Mechanical Behavior of Molybdenum-Modified Cr3Si/Cr5Si3 Intermetallics

Published online by Cambridge University Press:  15 February 2011

M. Nazmy
Affiliation:
Dept. of Materials Technology, ABB Power Generation Ltd., 5401 Baden, Switzerland
C. Noseda
Affiliation:
Dept. of Materials Technology, ABB Power Generation Ltd., 5401 Baden, Switzerland
S. Augustin
Affiliation:
Dept. of Materials Science and Engineering, Rensselear Poly. Inst., Troy, NY, USA
P. Lipetzky
Affiliation:
Dept. of Materials Science and Engineering, Rensselear Poly. Inst., Troy, NY, USA
N. S. Stoloff
Affiliation:
Dept. of Materials Science and Engineering, Rensselear Poly. Inst., Troy, NY, USA
Get access

Abstract

Two molybdenum-modified chromium suicide base intermetallics have been prepared by powder metallurgy and investigated with respect to the hardness, flexural strength and fracture toughness at different temperatures. As toughening phase, tungsten, Pt-6%Rh and Saphikon fibres were tried to improve the toughness of these two intermetallics. The tungsten fibers generated microcracks in the base material due to the large mismatch in the coefficients of thermal expansion (CTE) between the fiber and the intermetallic. The Pt-6%Rh and Saphikon fibers did not exhibit such cracking.

An improvement in the fracture toughness was observed especially at elevated temperatures. The Saphikon fibers did not show interfacial reaction. Some limited diffusion of silicon was detected in the Pt-6%Rh phase after 1400°C treatment.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable