Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T03:13:58.449Z Has data issue: false hasContentIssue false

Mechanical Properties of Composition Modulated Copper-Nickel-Iron Thin Films

Published online by Cambridge University Press:  26 February 2011

A. F. Jankowski
Affiliation:
ROCKWELL INTERNATIONAL, ROCKY FLATS PLANT, P.O. BOX 464, GOLDEN, CO 80401
T. Tsakalakos
Affiliation:
Dept. of Mechanics and Materials Science, Rutgers University, P.O. Box 909, Piscataway, NJ 08854
Get access

Abstract

The enhanced elastic modulus effect was found in composition modulated Cu/NiFe foils. Young's modulus was measured via tensile testing on thin foils containing short-wavelength composition modulations of 1.4–10. nm. The foils, of 53% Cu -40% Ni -7% Fe composition, were produced by vapor deposition using a three-source evaporator. As compared with homogeneous foils of the same average composition, the modulated foils exhibited an appreciable increase (up to 300%) in modulus for two distinct ranges of compositon wavelength: 2.1–2.7 nm and 3.6–4.1 nm. Results of x-ray diffraction and Mossbauer spectroscopy studies suggest the concept of interfacial coherency, accommodating the lattice misfit between the composition layers, is the underlying structural feature responsible for the enhanced modulus effect.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1985

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable