Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T05:18:04.182Z Has data issue: false hasContentIssue false

Mechanical properties of SU-8

Published online by Cambridge University Press:  10 February 2011

A. Mcaleavey
Affiliation:
ME Department, Johns Hopkins University, Baltimore, MD 21218, sharpe@jhu.edu
G. Coles
Affiliation:
ME Department, Johns Hopkins University, Baltimore, MD 21218, sharpe@jhu.edu
R. L. Edwards
Affiliation:
Applied Physics Laboratory, Johns Hopkins University, Laurel, MD 20723
W. N. Sharpe Jr.
Affiliation:
Applied Physics Laboratory, Johns Hopkins University, Laurel, MD 20723
Get access

Abstract

An existing test system for recording the stress-strain curves of metal microspecimens has been used to measure the strength of the ultrathick photoresist SU-8. The microspecimens are 3 mm long with a gage section 0.2 mm wide. The SU-8-25 specimens were 0.08 mm thick with an average strength of nearly 120 MPa, and the SU-8-50 specimens were 0.125 or 0.145 mm thick with an average strength of 130 MPa. Measurements of Young's modulus proved difficult, but a preliminary value of 3 GPa was obtained.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable