Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T19:39:13.897Z Has data issue: false hasContentIssue false

Metal / Hydrogenated Amorphous Silicon Interfaces

Published online by Cambridge University Press:  26 February 2011

Jerzy Kanicki*
Affiliation:
IBM Thomas J. Watson Research Center P.O.Box 218, Yorktown Heights, New York 10598, U.S.A.
Get access

Extract

The contact properties between different metals and hydrogenated amorphous silicon, prepared by various deposition techniques in different laboratories, are reviewed. From these studies the appropriate metallizations have been established for the achievement of Schottky diode, quasi-ohmic or ohmic contact to undoped and doped films. The various characteristic parameters describing Schottky barrier interfaces such as ideality factor, current saturation, contact resistance and barrier height are discussed. The dependence of Schottky barrier height upon the metal work function, measuring and annealing temperature, and optical band-gap are also reported. The minority-carrier injection and series resistance effects on the contact properties of a-Si:H diodes are described. All the results are interpreted in terms of a self-consistent model that exhibits an electrode-limited to bulk-limited transition.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable